Hi emuola,
Here, as promised are scanned pictures and a drawing of the Amiga 1200 floppy drive support bracket. I have both Commodore and Escom A1200s and the brackets are the same, even though the floppy drives are different types.
The pictures will give you a good idea what the finished bracket looks like, and the drawing provides all the dimensions you will require to make one. The drawing is scanned at 300dpi and should be suitable foir printing.
If there are no mounting holes on either side of your floppy drive, you will have to drill an additional hole in your A1200's case to line up with one of the mounting holes underneath your drive. That should be sufficient to hold it in place.
|