View Single Post
Old 09 August 2009, 18:13   #13
Hamster tamer
Join Date: Apr 2007
Location: Out in the woods
Posts: 122
Originally Posted by FOL View Post
RAM-Handler 44.23 should be 44.24 (after patched).
Quick note, you only need 44.24 if you're putting the ram-handler in ROM.
All I did was remove an unused BSS hunk and bump the revision number.

I have been testing and have been able to boot off a 20GB and 40GB boot partition. Im still testing, trying to push it to the limit, .
If anyone is interested in trying, I've uploaded another patch for scsi.device (43.43 IDE only), it includes Platon+Toni's fixes, plus I've optimised the IDE task a little, and removed some left over debugging code.
IIRC(I did it last year, fuzzy memory) it also includes Piru's SpeedyIDE patch from Blizkick.
Works for me, but YMMV etc.

If anyone is scared of using spatch on a CLI, just plonk the .pch files in Remus/Patches and extract the scsi.device with ROMsplit, it'll save the original, then apply the patches automagically.
Doobrey is offline  
Page generated in 0.03972 seconds with 10 queries