View Single Post
Old 30 June 2009, 00:47   #3
Another Amiga fan
beltrixx's Avatar
Join Date: Jan 2009
Location: Pallejà, Barcelona / Spain
Age: 45
Posts: 39

Originally Posted by jotd View Post

I don't know if this helps but:

I had the problem when I sold my 1230XA in 1995 (ouch, that was ages ago), the problem was that I had lost the utility disk.

I remember that we wrote a script to manually set the ram (with a tool from aminet), and it worked OK (so you don't need the utilities at all).

But obviously it was not a 128Mb SIMM but rather a 16MB at the time.

Anyway WTF if it does not display any RAM? if WB recognizes it it's fine. I've learnt to forget about config perfection in the amiga world, while it works it's cool, after all those years...
Thank you for the reply,

WB recognizes the 128 Mb SIMM properly but If I change it by a 32 Mb SIMM it only recognizes 12 Mb... This 32 Mb SIMM was originally fitted in the card and was recognized properly when I managed to ran the setXA config utility without problems.

Anyway, I'll follow your advice and won't bother about it unless the 128 Mb doesn't get recognized


beltrixx is offline  
Page generated in 0.03949 seconds with 10 queries