View Single Post
Old 14 March 2009, 22:08   #9
Registered User
portarinos's Avatar
Join Date: Feb 2009
Location: Volos / Greece
Age: 40
Posts: 132
As i had quite the same problems with a similar setup i would suggest:Wipe off every single partition. Boot with the OS 3.9 Emergency Disk and run HDToolbox. (Re)install the HD (that means new RDB), save and then switch off. Boot with the OS4 floppy and have your cd-rom attached on the primary port as slave. Let it work for you and as soon as you reach the Installation procedure at the very moment it asks you to install disk and refresh its RDB JUST DON'T DO IT. Set up the new partition that will host your OS4 and don't forget to include the option regarding Long Filenames. Also don't forget to change the DOS 03 digits to 07. Confirm every change/option by always pressing ENTER. Continue the installation, finish it, switch off for 20 secs and off you go (hopefully). Good luck and please let us know what happened.
portarinos is offline  
Page generated in 0.03986 seconds with 10 queries