View Single Post
Old 04 March 2009, 13:20   #3
NovaCoder
Registered User
NovaCoder's Avatar
 
Join Date: Sep 2007
Location: Melbourne/Australia
Posts: 3,440
Hiya,

The only way I could get it to save my TCP/IP settings save was to change the permissions of all the files under 'AMITCP/DB' (+delete & write).

I tried the help menu but all I got was an EasyNet error dialog saying 'Cannot open RAM:T/EasyNet.log'. This was strange because if I typed the same command into the shell it opened the log?

EasyNet.log:
Code:
++ EasyNet Information ++

Version            = EasyNet 0.170 (15/12/08) AmigaKit.com
File Size          = 366256 bytes
bsdsocket.library  = unknown


++ Network Settings ++

Your IP address    = 192.168.0.53
Network SubNetMask = 255.255.255.0
Router/Gateway IP  = 192.168.0.1
Your hostname      = amiga
Network domainname = wireless614


++ Domain Name Servers ++

Primary DNS        = 203.134.64.66
Secondary DNS      = 203.134.65.66
Tertiary DNS       = 


++ Network Interface ++  

Device             = prism2.device (unknown version installed)
Unit Number        = 0
Wireless Settings  = C:SetPrism2Defaults SSID wireless614 MANAGED TEXTKEY AAAAXAAAAX001    (version 1.2 installed)
Library            = pccard.library (unknown version installed)


++ TCPIP Settings ++  

MBUF_CONF MAXMEM   = 256K
Use Name Server    = First
Use Loopback       = No
Debug SANA         = Yes
Gateway Mode       = Yes


++ Hosts ++  

  ** NO HOSTS ADDED **


++ Assigns ++  

Assign AmiTCP: "System:Internet/AmiTCP"
Thanks
NovaCoder is offline  
 
Page generated in 0.04701 seconds with 9 queries