View Single Post
Old 18 February 2009, 11:55   #16
Unemployed & Lovin' it
Peter's Avatar
Join Date: Nov 2006
Location: Kent
Age: 48
Posts: 2,614
Once you have marked out exactly where your ports are going to mount and you have marked out in pencil on the casing a plan, drill initial holes with either a dremel or a very small drill - make enough holes in each area to allow the needle files to enter the space - continue with these tools, finishing the job with some very fine emery paper.

Keep testing the slots you are filing for size - don't take away too much casing.
Take your time as one slip and you can damage the casing.
Peter is offline  
Page generated in 0.08155 seconds with 9 queries