|
I have this evening dumped my Workbench 2.1 and 3.0 sets.
First, here are the CRC32 checksums of the ADF images dumped from my Amiga OS 2.1 disk set (version 38.36):
INSTALL 2.1 - $7CD65533 (P/N 370166-02)
WORKBENCH 2.1 - $6875BEF7 (P/N 370167-02)
EXTRAS 2.1 - $0A2F739A (P/N 370168-01)
FONTS 2.1 - $CDB3C7ED (P/N 370169-01)
LOCALE 2.1 - $8EFF6422 (P/N 370170-01)
I have colour-coded these checksums green, even though they do not agree with those for Redwood's version 38.36 set, because I bought these new from Eyetech and they have been write-protected straight from the wrapping.
Second, here are the CRC32 checksums of the ADF images dumped from my Amiga OS 3.0 disk sets (version 39.29), again write-protected from new:
WORKBENCH 3.0 - $A4D9752D (P/N 370127-02)
LOCALE 3.0 - $67835FE5 (P/N 370129-01)
EXTRAS 3.0 - $95DA642D (P/N 370128-01)
FONTS 3.0 - $242FF841 (P/N 370191-01)
STORAGE 3.0 - $0C8C24D5 (P/N 370150-01)
Again, I have colour-coded these checksums green to indicate that I am sure these disks have never been written to from new. I fact, I have two sets of these disks: One is an original Commodore Amiga set with the part numbers shown, and the second is an Eyetech set of "replacement" Workbench 3.0 disks. Both sets thave the same checksums.
These sets do not include an Install disk, but the Eyetech set was supplied with an "A1200 Hard Drive Partitioning & WB Installation disk", Serial Number HD00010362 with CRC32 checksum $FEC4F100.
BTW, I can confirm that my Amiga OS 3.1 disk sets are version 40.42 with the same part numbers given by Redwood.
Next, I will dump my 2.04, 2.05 and 1.x sets.
prowler
|