View Single Post
Old 17 January 2009, 01:55   #2
NovaCoder
Registered User
NovaCoder's Avatar
 
Join Date: Sep 2007
Location: Melbourne/Australia
Posts: 3,444
Quote:
Originally Posted by Yotoxionomai View Post

  • FlexATX Form Factor (21.6 x 17 cm)
  • CPU SoC AMCC 440ep (400, 533 or 667 Mhz)
    • Integrated DDR 266 mhz memory controller
    • Integrated PCI controller
    • Integrated Flash memory devices controller
    • Integrated USB 1.1 Host and 2.0 Device controller
    • 2x integrated Ethernet 10/100 ports
    • Up to 4 serial ports
    • 2x I2C interfaces
    • SPI interface
    • 64 pin for I/O General Purpose
  • 2x DDR DIMM 100 slots, max 1 GB RAM
  • USB 2.0 OHCI/EHCI NEC PCI controller (2x external ports, 2x internal ports)
  • Audio Cirrus Logic CS4281 and Realtek ALC655 Codec
  • Silicon Image 4x Serial ATA ports
  • Pericom 8150B PCI Bridge
  • FPGA Lattice XP with 80 pin I/O expansion connector
  • 1x PCI Slot - 32 bits, 66 Mhz
  • 2x PCI Slot - 32 bits, 33 Mhz
  • mini PCI Slot - 32 bits, 33 Mhz (optional)
  • RTC with backup battery
  • ZigBee module (optional)
  • UBoot 1.3.1
Main Board only with 667 Mhz cpu, (no Ram)

375,00 euro
And for those that missed it, the 2 most important improvements are:

2x DDR DIMM 100 slots, max 1 GB RAM
1x PCI Slot - 32 bits, 66 Mhz



This should be a really good board by they time I can afford to buy one, let's hope nasty old AmigaInc don't kill it.
NovaCoder is offline  
 
Page generated in 0.07333 seconds with 9 queries