View Single Post
Old 11 January 2009, 20:15   #5
Miggy Ate My Hamster!
PowerPie5000's Avatar
Join Date: Nov 2008
Location: Blackpool, UK
Posts: 1,561
I would check the pins on the controller ports, they are identical to the amiga ports and ive had a couple break on me in the past (damn those inferior joysticks with short leads!)

Sometimes when the pins break they dont always fall out, they could still stay in the port but would be a bit loose. I would get a small pair of tweezers and *very* gently push or pull each pin and see if any slide in/out.
PowerPie5000 is offline  
Page generated in 0.03871 seconds with 10 queries