Thread: AmigaSYS forum
View Single Post
Old 10 January 2009, 02:45   #50
Dary
Junior Member
Dary's Avatar
 
Join Date: Dec 2004
Location: Hungary
Age: 36
Posts: 406
I looked at everything, and is found onto everything the solution. I prepared pictures.

1, AmigaOS 3.9 Bad installation library error:
I test your mode (added amigaos3.9 cd, not mount)

= http://amigasys.extra.hu/local/AmigaOS39_1.jpg

I wrote it early this install mode is not good. If you add the compact disk to it, the attributums they change on Amiga side -> this files read only, not upgrade amigasys files = see picture.

Good install:

Install AmigaSYS 3.1 and use this files -> http://amigasys.extra.hu/local/UAEscsiCDMount.zip

Unpack zip work: Start AmigaSYS 4, press f3.Type:
Work:
Mount Cd0
or cd1, cd2, etc....

Mount AmigaOS3.9 CD and wait for start installation.

=

http://amigasys.extra.hu/local/AmigaOS39_2.jpg

Working perfect!

2, Button error:

This is little mistake BB2 use new workbench rutines, you need new Birdie.prefs with disable some features -> http://amigasys.extra.hu/local/Birdie.zip unpack work: and copy System:Prefs/Env-Archive, and reboot, work good, buttons and windows is ok.

BB2 + new birdie.prefs: http://amigasys.extra.hu/local/AmigaOS39_3.jpg

after reboot: http://amigasys.extra.hu/local/AmigaOS39_4.jpg

Next upgrade fixed this bugs.

Dary

Last edited by Dary; 10 January 2009 at 13:04.
Dary is offline  
 
Page generated in 0.07639 seconds with 9 queries