View Single Post
Old 28 October 2008, 02:14   #532
Workbitch 1.3

T_hairy_bootson's Avatar
Join Date: Oct 2001
Location: Melbourne, Australia
Age: 41
Posts: 2,028
Originally Posted by NovaCoder View Post
Even though mine has always been stable (ie you could turn the MB upside down and it didn't budge) I wanted to be sure it wouldn't move about when I transported it so I last night I siliconed the sucker down. I'd recomend it to anyone and it's very easy to do. I also siliconed the VGA out connector in place as it comes out very easily.

Talking of Indivision Mods, I also recommend that people grind down their lower RF shields under the floppy to prevent the VGA cable getting squashed, you don't need to take much metal off to do this (I love my Dremal). Just make sure you don't attempt to do this while your MB is still in place

I also hacked an old PC VGA backing plate into shape so now my 1200 is all good for some decent AGA output
I hope you used non-accetic or neutral silicone. It will eat through anything metallic it comes into contact with otherwise.
T_hairy_bootson is offline  
Page generated in 0.03960 seconds with 10 queries