View Single Post
Old 03 October 2008, 15:19   #460
Amibay Senior Staff
TheCorfiot's Avatar
Join Date: Feb 2008
Location: Cardiff / Wales
Posts: 1,302
Originally Posted by Oliver_A View Post
Is, in any case, the logo ALWAYS displayed on boot-up?
If you reboot the A1200, with 3 key's held down less < 2 Sec, No Video output appears at all & the Monitor reverts to standby mode.

IF A1200 require Powercycle at anytime then PSU must remain off for at least 1 Minute or Indivision fails to Output any display or switch monitor on.

Hope this explains the symptoms.
TheCorfiot is offline  
Page generated in 0.04028 seconds with 10 queries