Thread: Amiga demobase
View Single Post
Old 19 July 2007, 19:26   #109
andreas
Zone Friend
 
Join Date: Jun 2001
Location: Germany
Age: 43
Posts: 5,858
Send a message via ICQ to andreas Send a message via AIM to andreas
Thanks heavy! I should tell zeg to fix them

sjakie: absolutely NO IDEA about your scripting stuff!
In case of emergency, rather ask Toni how this could be handled!

I'll give a step-by-step walkthrough how to add a HD binary:

0. Make sure it's a true SINGLE-FILE binary. "Freedom Arms" comes with an additional two files with a whopping 400K each which it will load later still while the demo is running, so there is no go here.
1. If you want to use Quickstart, remember to set configuration FIRST (!!!), otherwise your HD drive list will be cleared!
2. Go to "Hard Drives" and press the "Add Archive" button.
3. If the HD drive list is all empty, set:
Device Name - DH0
Volume Label - you can choose freely, e. g. 'xyz'

Path:
Use the pull-down menu on the bottom, setting the filter off (ALL FILES visible). This is important: otherwise your hd binary won't show if it is extension-less (as usual)!
Select your binary and start emulation.

Last edited by andreas; 19 July 2007 at 19:36.
andreas is offline  
 
Page generated in 0.08807 seconds with 9 queries