View Single Post
Old 14 December 2006, 08:50   #2
Registered User
Join Date: Feb 2006
Location: Australia
Posts: 112
This may help (Or not!)

System :- A1200 '060

The CPU is fully activated by running the program CPU60 as the first

line in the startup-sequence. There should (?) be a similar program

for the '040.

Also the standard '060 library (In libs drawer) is replaced by a

a specific '060 library for the CPU. Presumably this applies to

the '040. Should be on the install disk.

Also try loading Workbench from the Floppy and see if anything


Your right about the '060....nothing has to be disabled (sorta


Cheers mate!
cooldude is offline  
Page generated in 0.12087 seconds with 9 queries