View Single Post
Old 07 December 2006, 22:21   #2
Registered User
thomas's Avatar
Join Date: Jan 2002
Location: Germany
Posts: 5,681
The filesystem is ok as it works fine when connected to my internal ide->cf adaptor.
So the cf card is probably partitioned. If so then you have to adjust CF0 to match exactly the partition data. First try LowCyl=2. If this does not work you have to use HDToolbox or similar to determine the drive geometry (block per track etc.) used to partition the CF card and the low and high cyl of the partition. There are mount list creators on Aminet which do this automatically for you. If you are running OS3.9 you can use the Mounter program.
thomas is offline  
Page generated in 0.04022 seconds with 10 queries