View Single Post
Old 04 December 2006, 08:33   #2
thomas
Registered User
thomas's Avatar
 
Join Date: Jan 2002
Location: Germany
Posts: 5,526
If you run PC0 from the storage disk it should ask you to insert the Workbench disk and if you do so, it should mount the drivers successfully. All needed files are on the Workbench disk (if it is original).

You should load PC0 into a text editor and check if it has an entry like Activate=1 or Mount=1. If not, then add it. If the entry is missing, the driver is only activated on access, i.e. you have to open a shell window and enter Dir PC0: or something similar.
thomas is offline  
 
Page generated in 0.04656 seconds with 9 queries