English Amiga Board - View Single Post

srg86 · 30 November 2006, 14:20

Hi

I have a Blizzard 1260 with a 16MB single sided SIMM for my A1200 but most of the time I've had it I've had to go back to my 1230-IV because of GURUs

If I don't have any 040 or 060 libraries then the machine is rock solid stable, no crashes at all *not tried any software that uses the unused FPU instructions* but the trouble comes once I've installed the Phase 5 libraries off the disk or even after updating them to the later versions. I'm using what I downloaded from http://phase5.a1k.org/. After that, I get these troubles:

ShowConfig shows CPU as 68040/68882 not 68060 and then crashes with GURU 80000003

Wordworth 2AGA and Final Writer 5 both crash with GURU 8000000B

If I run Lha from C then after running most of things in C then cause GURUs 80000003, 80000004 or 8000000B especailly Mount and Assign so I have to replace them with what's on my Workbench disk.

I'm running Kickstart 39.106 and Workbench 39.29, my A1200 has motherboard revision 2B and I'm running from a 200W PC PSU

Is there anything that I have missed to get this machine stable?

Thanks :-)

30 November 2006, 14:20	#1
srg86 Registered User Join Date: Jul 2006 Location: England Age: 40 Posts: 15	Blizzard 1260 woes [SOLVED] Hi I have a Blizzard 1260 with a 16MB single sided SIMM for my A1200 but most of the time I've had it I've had to go back to my 1230-IV because of GURUs If I don't have any 040 or 060 libraries then the machine is rock solid stable, no crashes at all not tried any software that uses the unused FPU instructions but the trouble comes once I've installed the Phase 5 libraries off the disk or even after updating them to the later versions. I'm using what I downloaded from http://phase5.a1k.org/. After that, I get these troubles: ShowConfig shows CPU as 68040/68882 not 68060 and then crashes with GURU 80000003 Wordworth 2AGA and Final Writer 5 both crash with GURU 8000000B If I run Lha from C then after running most of things in C then cause GURUs 80000003, 80000004 or 8000000B especailly Mount and Assign so I have to replace them with what's on my Workbench disk. I'm running Kickstart 39.106 and Workbench 39.29, my A1200 has motherboard revision 2B and I'm running from a 200W PC PSU Is there anything that I have missed to get this machine stable? Thanks :-) Last edited by srg86; 03 December 2006 at 11:58.