Thread: ADFread 1.0
View Single Post
Old 25 October 2006, 10:29   #31
nnever2000
Registered User
nnever2000's Avatar
 
Join Date: May 2002
Location: italy
Posts: 132
Hi all,
I setup an old pentium II with two floppy 3,5; then I installed the necessary software and then I dumped severall amiga disk. Anyway for all track and all disks the program had 9 read errors for each track so I obtained only bad adf.

May be the problem is the 3,5 drive?

On the Disk2FDI site I found these compatibility list; my drive is none of them

------------------------------------


Known 3.5" floppy disk drives with a real index signal (good):
- Citizen
- OSDA-20E-U
- Hewlett Packard
- D2035-60121
- Mitsumi
- MF355F-3250MG
- Panasonic (Matsushita)
- JU-257A606P
- Samsung
- SFD-321B
- Sony
- MPF520-1
- MPF920-E
- Toshiba
- ND-356T-A

Known 3.5" floppy disk drives with a fake index signal (bad):
- Alps Electric co., ltd.
- Mitsumi
- D359M3
- D359M3D
- D359T6
- Nec
- FD1231H
nnever2000 is offline  
 
Page generated in 0.06442 seconds with 9 queries