View Single Post
Old 04 August 2005, 16:49   #8
Posts: n/a
Originally Posted by adolescent
You can make a PAL/NTSC switch for the CD32 by grounding pin 41 of Alice. Problem is it's not true PAL (the colorburst signal is still NTSC), and will show as black and white on a PAL TV.
Jesus Christ don't do that, don't mess with the poor Alice ! Look out near the RF Modulator, you'll find the R203 resistor. Remove it. Solder two wires to the solder points. Then to the two pole switch.

Voilá, 50/60 Hz Switch. I've done it this way and it works beautifully. You can check what I've done on my web site at

Page generated in 0.06728 seconds with 9 queries