View Single Post
Old 30 June 2005, 00:24   #13
Registered User
Galaxy's Avatar
Join Date: May 2004
Location: Canberra, Australia
Age: 40
Posts: 1,417
C: is usually assigned to system2.x:c, system3.x:c or dh0:c (not work:c) if you are running a standard workbench 2 or 3 setup, which I think is what lopos2000 was getting at. If work: is you main (or only) partition then c: is probably assigned to work:c - but this is not the standard setup.

Also, it might be worth checking your startup-sequence and user-startup (in the s: directory of your system/boot partition) to see where c: is being assigned.
Galaxy is offline  
Page generated in 0.09244 seconds with 9 queries