View Single Post
Old 30 December 2004, 21:20   #4
thomas
Registered User
thomas's Avatar
 
Join Date: Jan 2002
Location: Germany
Posts: 5,526
Quote:
Originally Posted by bippym
okay boot with no startup sequence

type LOADWB and workbench will load

Next using a txt editor (CygnusED or ED) edit the file sys:s/startup-sequence and remove your password program

Reboot
If the login screen belongs to Multiuser then it is not that easy. In this case you have to boot from the Install disk, run HDToolbox and change the DosType (aka identifier) of all partitions from MUFS to DOS\3. Then reboot from the Workbench disk and use a text editor to remove the login command from s:user-startup (it isn't in startup-sequence). Reboot again without a floppy in the drive and the login screen should have disappeared.
thomas is offline  
 
Page generated in 0.06446 seconds with 9 queries