Regardless of which CPU card I use (I have a 3640 and the CS MK2, as well as a BG9060 I built), once I swap out the ROMs for DiagRom, it fails to detect any RAM. ChipRam fails, so I tried another appropriate SIMM, same issue, removed and swapped the fast ram, no change. What's the most likely culprit for this behavior. I really can't interpret what the output of diagrom, as it's above my knowledge level (serial port output is the only part that works for me). If I have SIMMS on the CS-MK2, it will get further in the test, but, fails with a 'PANIC, inadequate resources to go further" statement.
|