Quote:
Originally Posted by siyllad
I was looking at the setup read me to check the pinout. It does not mention which pin(s) are ground.
Can someone let me know please.
|
In all of the related setup docs I have written, signal grounds are indicated by the associated
electrical symbol (downward pointing triangle). These are simply oriented sideways as drawn in the related GPIO header diagram in the Minimig setup guide.
In terms of supply and ground pin placement, FleaFPGA Ohm's GPIO header is identical to what you would find on a raspberry pi 40-pin header. Please refer to Appendix-A of my
Quickstart Guide if you still have doubts. Cheers.