View Single Post
Old 15 January 2020, 21:21   #30
psoma
Registered User
 
psoma's Avatar
 
Join Date: Nov 2019
Location: Melbourne, Australia
Posts: 193
Quote:
Originally Posted by dreadnought View Post
Wait, soldering? I thought I have the right model: A500 v6 with that particular ECS Angus. Sysinfo says it's "1 Meg". Something still needs to be done?

I'm not aiming at 100%, 95% perhaps. Also, other folks said I could just use HDD installs, so it does not need exactly to be WHDLoad.
Sysinfo will say you have the 1MB Agnus, but that doesn’t necessarily mean you have 1MB of Chip RAM, or are configured to use it. There’s a jumper on the board that needs to be bridged so additional RAM is added as Chip rather than slow fast. You don’t need soldering “skills” to do that, but you will need a soldering iron and some solder.

HDD installs will get you around 50% of the games you’re looking to play (at best). The aim should definitely be WHDLoad if you’re hoping for 95%.
psoma is offline  
 
Page generated in 0.05090 seconds with 11 queries