Quote:
Originally Posted by Syntrax
I am under the impression that you create a list of disks that you will use, that list is written to disk (000) and after reset, the Gotek will offer the disks that were put on that list. Consequently: if the disk you need is not on the list, you will need to reset, need te create a new list and reboot again. I can see this is the most workable way if you've got 1000's of disks and you know that you only need 5 or so.
|
No, you don't have to reset, especially if you are working on the Workbench with the HxC Firmware and the HxC File Selector.
With the latest update you can start file selector and return to the workbench without resetting/rebooting the machine.
Here is the latest file selector update :
https://github.com/jfdelnero/HXCFE_f...ector/releases