Thread: Ncomm errors
View Single Post
Old 11 November 2003, 01:07   #6
Puzzle
Registered User
Puzzle's Avatar
 
Join Date: May 2001
Location: Somewhere
Posts: 99
The reason for that this is happening, is that the Amiga has only a 1-byte buffer for the serial port. So the chipset is not fast enough to retrieve the data stream, when the bitrate is set at 57600bps or higher.

You could try running the machine in Multiscan or Productivity-mode (if this is an AGA-machine), if you have a VGA or Multisync-monitor. It could help.
Puzzle is offline  
 
Page generated in 0.06628 seconds with 9 queries