English Amiga Board - View Single Post

DonutKing · 14 October 2018, 03:05

Need some assistance please

Trying to setup a 16GB CF card for my A1200 rev 1D4 with 3.1 ROMs.

I followed the guide here: https://16bitdust.wordpress.com/2015...nuae-and-pfs3/

I have partitioned the card into a 1024MB partition for DH0, and the remaining space as DH1. installed PFS3 on both partitions and then installed latest version of ClassicWB ADVSP.

Everything works fine in WinUAE but when I install it into my Amiga I get the below error on boot:

If I click OK I get told there is no disk in DH0, and eventually after continuing to click OK I get dumped to a CLI prompt. I can't open either DH1: or DH0: - it just asks me to insert it into any drive.

I am using scsi.device 44.2 and placed it in the DH0 DEVS folder.

Here's what sysinfo says about DH0:

Here's HDToolbox settings:

Any assistance would be appreciated

14 October 2018, 03:05	#1
DonutKing Registered User Join Date: Sep 2011 Location: Australia Posts: 40	Help with PFS3 on CF Need some assistance please Trying to setup a 16GB CF card for my A1200 rev 1D4 with 3.1 ROMs. I followed the guide here: https://16bitdust.wordpress.com/2015...nuae-and-pfs3/ I have partitioned the card into a 1024MB partition for DH0, and the remaining space as DH1. installed PFS3 on both partitions and then installed latest version of ClassicWB ADVSP. Everything works fine in WinUAE but when I install it into my Amiga I get the below error on boot: If I click OK I get told there is no disk in DH0, and eventually after continuing to click OK I get dumped to a CLI prompt. I can't open either DH1: or DH0: - it just asks me to insert it into any drive. I am using scsi.device 44.2 and placed it in the DH0 DEVS folder. Here's what sysinfo says about DH0: Here's HDToolbox settings: Any assistance would be appreciated