hi,
I'm new to the scene and I saw this thread to try to use an SSD instead of a CF card. I followed this thread and the one on using large disk > 4Gb.
http://eab.abime.net/showthread.php?t=61666 and
http://eab.abime.net/showthread.php?t=32256
I installed ClassicWB FuLL 3.1 using FS-UAE. Patched the SCSI.device to 43.45 and managed to add the PFS3-aio to RDB block. Everything went well and I can boot it in FS-UAE.
However, when I plug it into real A1200, it can't see the partitions under Boot Options. I get the line:
CC0: ..... Enabled CC0 priority 3 ADOS carddisk-0
But no partitions are visible on the SSD
My A1200 has ACA 1221EC Accelerator. kickstart 3.0
Code:
sudo rdbtool /dev/rdisk2 info
Password:
PhysicalDisk: 0 1465788 46905248 22Gi heads=1 sectors=32
LogicalDisk: 5 1465788 46905088 22Gi rdb_blks=[0:159,#160] used=[hi=145,#146] cyl_blks=32
Partition: #0 'RDH1' 5 70000 2239872 1.1Gi 4.78% PFS3/0x50465303 max_transfer=0xffffff mask=0x7ffffffe num_buffer=30 bootable pri=0
Partition: #1 'RDH2' 70001 140000 2240000 1.1Gi 4.78% PFS3/0x50465303 max_transfer=0xffffff mask=0x7ffffffe num_buffer=30
FileSystem #0 PFS3/0x50465303 version=18.0 size=69388 seg_list_blk=0x4 global_vec=0xffffffff
It's taken a whole day to get to this point and when it worked in FS-UAE, I thought I was home and dry. I'm stumped as what to do next. My current partitions are all below 4GB!
Please help
