Hi,
I combined Mathesar's new gary adapter, redrawn by Mq666 into one board:
(links removed)
Changes:
- Added a jumper for RTC enable.
- Added a footprint for SMD RTC chip, so you can populate either one.
- Made jumper drills larger (0.8->0.9mm) per Mathesar's complaint.
- Gary adapter by Mathesar with flipflops for BLIT.
- Corrected JP4 error on gary adapter.
If you've never had PCBs made, it's dead easy:
- Visit your favourite cheap Chinese board house. e.g.
https://www.elecrow.com/special-offe...pcb-10pcs.html
- Upload the gerbers ZIP file.
- Select 10x10cm, HASL and 1.2mm thickness.
Done!