Quote:
Originally Posted by Toni Wilen
It probably is not visible if PC is fast enough (hides in the noise) but it isn't the important part, more important it that some feature gets enabled or disabled when it shouldn't and it can cause random problems.
Some more tests:
- Does entering and exiting GUI change anything? (do not modify any settings)
- Does entering GUI, then changing some totally unrelated option (for example misc panel middle button option), then exiting change anything?
- Does normal reset change anything (ctrl+winkey+winkey or ctrl+home+end)
|
Tested with the "state300_1" config (from post#27):
- No, entering and exiting GUI does not change anything !
- No, entering GUI and change misc panel middle button option then exiting does not change anything! (but I do some more tests with other options)
- Yes, normal reset (ctrl+winkey+winkey) change usage from 100% to 112% !
Btw. if start the emu with config "state301_1", then F12 and double click on config "state300_1" it will show usage 112% instead of 100%,
but if start the emu with config "state300_1", then F12 and double click on config "state300_1" it will show usage 100% (no change here).
EDIT: After some more testing with other options no luck to find anything interesting.
(except that after changing from double buffer to triple buffer it change usage, but it returns back to "normal" after changing to double buffer... Same with sound buffer, smaller buffer higher usage - what is expected.)