View Single Post
Old 21 April 2017, 01:50   #79
Registered User
Join Date: Jun 2012
Location: Toronto / Canada
Posts: 92
Comspec sa1000 driver disk is uploaded to the Zone as Comspecsa1k.scp.
I'll also upload a Comspec.dms disk which doesn't include the updated HDD List that I created.

There are a few rule for using the Comspec SCSI Drives, the first Partition must be Lower than 50M and Must be OFS NOT FFS. Maximum allowable Drive size in 34.808 Driver is 500MB. Lasger Drives are detected but not used. To support Larger Drive ROM Version 35.1003 was required and only worked for the SA2000 Controller card and required a Different Driver Disk and used a different method to detect SCSI devices using the SCSI Direct Command.


Last edited by shaf; 21 April 2017 at 01:57. Reason: additional information added
shaf is offline  
Page generated in 0.04750 seconds with 9 queries