|
A3000 ROM scsi.device does not need any updates if direct scsi filesystem is in use. Try without patches and make sure dos type is PDS3 (or PDS<whatever>) to force PFS3aio to use directscsi, without it TD64 and NSD is attempted first.
Another easy test is to create partition at the end of the drive (small partition) using A3000, format it, then mount it in WinUAE. If partition fails to mount: something is wrong, possibly with scsi2sd.
(also repeating again and again: max transfer is only needed with A600/A1200/A4000 IDE.)
|