View Single Post
Old 11 February 2017, 19:17   #1
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 42
Posts: 19,561
WinUAE 3.5.0 beta series (was 3.4.1)

WinUAE 3.4.1 beta series

--

Main rule: Before reporting, make sure bug is NOT in previous offical version. It must be unique to this beta series! (If it is -> post in separate thread). No feature requests.

More information: http://eab.abime.net/showpost.php?p=861456&postcount=1.

--

http://www.winuae.net/files/b/winuae_3410b1.7z
http://www.winuae.net/files/b/winuae64_3410b1.7z

All kinds of misc changes and updates.

Beta 1:

- Quickstart Blizzard modes (except if JIT enabled) enabled 24-bit addressing which caused new autoconfig/fallback mode support to think Blizzard is in 68020 fallback mode, disabling autoconfig.
- Added Apollo 1240/1260 SCSI module installed on/off option.
- IDE Identify drive command didn't reset multiple sector offset value. If previous read was partial multiple transfer, identity drive returned previously read data block.
- Added Lock drive option to real harddrive mount dialog. If checked, all partitions in selected drive will be locked and unmounted when emulation is running, enabling full read/write access even if drive has Windows mounted FAT partition(s). Lock will be ignored if drive has one or more NTFS partitions.
- Add harddrive didn't accept magneto-optical devices.
- Lots of softfloat FPU mode and normal FPU mode fixes and updates. (Andreas Grabher and me)
- Softfloat FPU mode added to GUI, supports on the fly switching.
- Untrap middle mouse button option was stuck.
- Implemented accurate 68020+ T0 trace mode emulation. (Original one has not been changed for ages..)
- Fixed crash when sound card audio play started and mono sound channel mode and "Include CD and FMV audio" was ticked.
- 271b3 "Blitter final D write don't increase "nasty" count" That is not true, I think this was only added to fix demo that randomly glitches on real hardware too.. Fixes intro Himalaya by Avalanche.
- Added illegal instruction at the end of each memory bank allocation, just outside of last available byte to force exception if execution falls of the edge of memory. This can happen if "more compatible" is not checked. Currently this causes bus error exception. May become halt in the future.
- Audio interrupts are delayed by 2 cycles, logic analyzer confirmed. Emulated only in cycle-exact mode. (Mission Elevator)
- Emulated sprite special case when DMA mode sprite's start X-coordinate is less than sprite's DMA slot position.
- Fixed AGA HAM6/8 behavior when BPLCON4 XOR value is non-zero. Planes 6 and 7 never affect palette selection if HAM8, Planes 4 to 7 if HAM6. If HAM control bits select hold mode, selected direct R/G/B value bypasses XOR operation. (Thanks to dissident for test cases)
- AGA EHB plane 6 half-brite selection bit is taken before BPLCON4 XOR adjustment. (Same)
- HAM mode and BPLCON4 BPLAM bit changes or HAM mode and BPLCON4 sprite bank bit changes and sprites in same scanline may have caused wrong sprite or HAM colors.
- >2M chip RAM didn't work in non-JIT compatible modes.
- Added -ldlog 1/2 command line parameter, logs all laserdisc commands.
- Recursive mode ROM scanner now skips directories starting with dot.
- HDF creator used old style dialog type.
- 68030 CE/prefetch mode cache access fix.
- JIT direct broke 512k and 1M chip RAM size detection.
- If statefile is loaded with one or more floppy images that can't be opened: keep fake disk in drive (like previously) and ask for new disk path when missing disk is accessed for the first time. (access = read or write attempt) Old disk path is shown in disk dialog title bar.
- SCSI emulation SCSI buffer re-sizing didn't handle READ(6) zero size length correctly.
- Added memory cycle-exact Quickstart step for A1200 and CD32 configurations. Less CPU heavy than full cycle-exact and usually not much more worse (or better). At least not until 68020 CE gets better.
- Memory cycle exact mode incorrectly counted internal CPU cycles partially.
- Memory cycle exact mode also enables more accurate custom chipset mode.
- 68020 CE mode adjustments, fixed Chip RAM access speed (was too fast previously), removed all extra cycle counting temporarily. Work in progress.
- Include key scancode in Input panel key events.

Softfloat FPU mode is now officially supported, Andreas Grabher (Previous) implemented required 6888x-specific features to softfloat support library. Only needed if "weird" features are required (denormals and unnormals, invalid operands) or extended precision (that WinUAE does not support due to MSVC not supporting it) or accurate status register flags or 100% accurate rounding/NaN handling, FMOD/FREM quotient etc.

Arithmetic exceptions are not yet supported. Trigonometric and logarithmic functions are currently implemented using normal native C-library functions and won't return 100% same results as real 6888x.

Not compatible with JIT FPU emulation.
Toni Wilen is offline  
AdSense AdSense  
 
Page generated in 0.06571 seconds with 9 queries