View Single Post
Old 08 December 2016, 21:42   #29
MickGyver
Registered User

MickGyver's Avatar
 
Join Date: Oct 2008
Location: Finland
Posts: 295
Quote:
Originally Posted by Daedalus View Post
As for the kit, it looks like it'll work with any pad as it's basically wiring directly to the button switches, effectively bypassing whatever internals were already there.
Yep, that's right. On the gamepad I used there were exposed solder pads which I drilled holes in and inserted the wires from the back side. This way it was possible to make very small solder joints that don't interfere with the rubber pads.
MickGyver is online now  
 
Page generated in 0.06486 seconds with 10 queries