View Single Post
Old 29 November 2016, 18:47   #15
roberthazelby
Amiga user since 1990
 
Join Date: Sep 2005
Location: Bristol, England
Age: 41
Posts: 326
Apologies for the delay. I've finally found time to knock up a review for SWAG meeting number 2...

SWAG Meet No. 2
Saturday 17th September 2016


Venue: The Makerspace, Swindon

Attendance: 11

Kit:

Amiga 1200 with Gotek drive / Network card
Windows PC running MAME
Amiga 500 with Gotek drive and 1942 monitor
Amiga 4000 030 and 1084ST monitor (not working - battery leakage and track erosion)
Laptop running WINAUE. Running Bomberman on the projector.
BBC Master 128
Amiga 1200
Amiga 600 with Vampire board
Amiga 600
Amiga 500 with 1084 monitor (expansion RAM ruined due to battery leakage)
Amiga One
Raspberry Pi running Amibian
Amiga CDTV


Following the success of the first SWAG meeting back in early May, which saw 12 Amiga fans get together for an afternoon of retro gaming, chat, and general tinkering, it was decided that a second session should be arranged for the 17th of September.

Our second meeting played host to a real selection of Amiga hardware meaning you weren't short of something to sit down in front of and try out.

The main feature for this month was “arcade conversions”. The Amiga plays host to some absolutely terrible conversions, but we were only interested in the cream of the crop.

An Amiga 500 equipped with Gotek was loaded up with a stack of arcade games, and alongside that we had a PC running MAME so we could compare the versions side by side. Some of the titles we played included Toki, Pang, Midnight Resistance, Buggy Boy, and Commando. The general consensus that afternoon was that Amiga really does have some great conversions!

One of our members spent the majority of the afternoon installing a Vampire expansion card on his A600, and experiencing varied success with it once it had been plugged in. The main issue seemed to be that the card and the TCP IP stack weren't totally happy together, and as such, the internet connection kept dropping on that machine

Elsewhere, and after a number of attempts to get Amibian up and running on a Raspberry Pi 3, and being unable to resolve issues with the screen resolution, we reverted to the trusty UAE for ARM installation for the remainder of the session. Perhaps Amibian is one we look at for a future meeting. It would be nice to get that running on a Pi 3.

On another desk, a dead Amiga 4000 was brought back to life. The leaking battery was removed and eroded tracks were cleaned. Prior to power-on, a small crowd circled the machine ready to see what would happen. The excitement on people’s faces when the machine loaded to Workbench was a real joy to see. The A4000 required further work, but this would need to be carried out after the session.

If you’ve read the kit list at the top of the report properly you’ll have noticed that we had one imposter machine in our midst in the form of a BBC Master 128. This wasn't an ordinary BBC Master, as it had 2GB of storage, 2 x battery backup carts and 4 different operating systems. This was brought along as a number of members wanted to see this up and running. We’ll likely bring one or two other platforms along to future meets, with the deal being if you bring another non-Amiga platform along you also have to bring an Amiga. Well, it IS an Amiga usergroup!

On another bank of desks, we were testing yet another Amiga set-up. The group had been kindly donated a full Amiga 500 desktop suite, complete with monitor and software. The hardware originally belonged to an Amigan who used his system for video editing. Unfortunately, he’d recently passed away, and one of his children wanted it to go to someone who would use it. We found one Amiga user who was keen to get back into the hobby, and who had the knowledge to bring it back up to fully working order. This went off with him and it’ll be coming back at the next meeting repaired and ready for use.

Towards the end of the session, talk drifted to the next meeting. After some discussion we’ve decided that the next meeting will be held at the Swindon Makerspace on Saturday 14th January. We’ll be meeting in the greasy spoon next door to the venue from 11am, and getting things underway from 12 noon. The first two meetings ran until 4:00pm. Due to a number of requests from those travelling from further afield, the January meeting will be the first that runs until 5:00pm!

If you'd like to attend the January meeting you can find more information on our web site at: http://www.southwestamiga.org.uk or via our Facebook group at: https://www.facebook.com/groups/southwestamiga
roberthazelby is offline  
 
Page generated in 0.10234 seconds with 9 queries