View Single Post
Old 16 November 2016, 22:12   #14
mark_k
Registered User
 
Join Date: Aug 2004
Location:
Posts: 2,481
I pulled back each disk shutter to check for mould on the visible disk surface (didn't rotate the disk inside the shell), didn't see any. I wonder if humidity/condensation inside could explain the problem.

Perhaps some drives are more susceptible to speed-variation when accessing such disks; e.g. if the motor torque is lower than other models, or the motor flywheel is less heavy?

I swapped the drive for another one of the same model, no change.
mark_k is offline  
 
Page generated in 0.08010 seconds with 9 queries