View Single Post
Old 21 September 2016, 20:10   #7
mark_k
Registered User
 
Join Date: Aug 2004
Location:
Posts: 2,481
Well at the moment:

- Load a config with resolution set to SuperHires and VGA autoswitch box ticked. Start emulation and WinUAE doesn't use VGA autoswitch.

- Load a config with resolution set to Hires and VGA autoswitch box ticked. Start emulation and WinUAE does use VGA autoswitch (as it should).
When a superhires mode happens to be in use, press F12. Notice resolution is set to SuperHires and VGA mode autoswitch box is ticked. Continue emulation and WinUAE continues to use VGA autoswitch. So there is some kind of internal "use VGA autoswitch" flag which is set then, which doesn't get saved to the config file.

Could you just ghost out/disable the SuperHires resolution option when VGA autoswitch is checked? Since with that checked the user presumably wants to switch between Hires and SuperHires depending on the displayed mode? [Or maybe disable the resolution selection drop-down when VGA autoswitch is checked? Like you do when Resolution autoswitch is set to anything other than Disabled.]
mark_k is offline  
 
Page generated in 0.05112 seconds with 9 queries