View Single Post
Old 10 September 2016, 18:16   #9
mark_k
Registered User
 
Join Date: Aug 2004
Location:
Posts: 2,818
I think you need to also:
- Set bit 7 (Valid) of byte 0 of the sense data if applicable
- Bits [7:5] of byte 1 contain the LUN (000 or 001 since the S1410A supports two drives). The rest of byte 1 and bytes 2&3 contains the LBA which you can copy from bytes 4-6 of normal SCSI sense data.
mark_k is offline  
 
Page generated in 0.09389 seconds with 9 queries