View Single Post
Old 23 August 2016, 16:04   #45
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 42
Posts: 19,533
Quote:
Originally Posted by mark_k View Post
I tested a config with Fastlane, 68040 and 32MB Z3 RAM on 3.4.0b1. I get a dialog saying "Out of memory or too much Z3 autoconfig space configured." when I load it and click Start. No dialog in 3.3.0.

Log output for 3.3.0 and 3.4.0b1 plus config attached. (I'm testing in Wine btw.)


Autoconfig board list:
Card 01: '<no name>' no autoconfig.
Card 02: 'Z3 Fast RAM'
a9.0a.f0.00.21.40.00.00.00.00.00.00.00.00.00.00
MID 8512 (2140) PID 10 (0a) SER 00000000
Z3 0x40000000 0x10000000 32M RAM 0
Card 03: 'Fastlane'
91.0b.70.00.21.40.00.00.00.00.08.00.00.00.00.00
MID 8512 (2140) PID 11 (0b) SER 00000000
Z3 0x42000000 0x12000000 32M ROM 1
END
NATMEM: Not enough memory for Z3REAL!
Out of memory or too much Z3 autoconfig space configured.
This should be already fixed in winuae.7z
Toni Wilen is online now  
 
Page generated in 0.05485 seconds with 9 queries