View Single Post
Old 19 April 2016, 19:27   #582
Retrofan
Ruler of the Universe

Retrofan's Avatar
 
Join Date: Mar 2010
Location: Lanzarote/Spain
Posts: 5,954
I always recommend to install BB2, some program needs it.

@supaduper installed it with his A600/Vampire a couple of days ago after updating it on WinUAE I guess.

Quote:
Originally Posted by supaduper View Post
Ok so after much Scratching of head...finally cracked it

so for the record to put Picasso96 on Amikit just to get you up and running on a basic setup:

1. Run S-Sequence, and add `Setpatch NOROMUPDATE Quiet` before the first Setpatch.
2. comment out `IF EXISTS C:CyberBugFIX` and C:CyberBugFIX` and `END IF`(3 lines are together)
3. Then go to Sys/Tools and run `Disable_CGX_Aga&Birdie`
4. Reboot
5. Install Picassco96, (just click proceed on each option)
6. Install latest SAGA driver 8h
7. Check in Prefs/screenmode to see that the saga modes are there.
8. Reboot
9. In Screenmode select a SAGA screen mode, I chose the 640x480 16bit, press test screen should go blank and output on HDMI, if your happy save the screen mode and save

10. Reboot ,Amikit now on HDMI

This will get you running on HDMI, I would then save the system off and any more fine tuning you try and mess up well you can go back to the basic setup !

thanks to Jack & Retrofan for their help much appreciated
I wouldn't use point 3 (I just would delete CyberbugFix from C to not disable Birdie too) and I would also disable FBlit and FText, the Booting Sound and BootScreen from the s-s.

Also, maybe if Birdie isn't showing the window borders, try increasing the wait here:

Code:
IF NOT EXISTS C:DisableBirdie
   C:Wait 1  ;prevents Birdie from not loading the background picture. 
   Run >NIL: SYS:Utilities/Expansion/Birdie/Birdie ? <Env:Birdie.prefs
ENDIF

Last edited by Retrofan; 18 December 2016 at 15:01.
Retrofan is offline  
 
Page generated in 0.03966 seconds with 10 queries