View Single Post
Old 05 March 2016, 11:58   #2
Registered User

Sir_Lucas's Avatar
Join Date: Dec 2008
Location: Norwich, UK
Posts: 522
Orinoco Silver/Gold will only work with WEP and WPA/TKIP.
Go to your router settings and check if you have it set.
WPA/TKIP - B/G mode. You can't use AES+TKIP. It has to be TKIP only.
You can't use mixed mode it has to be WPA only.

Do you have your Prism2v2 drivers installed?
Do you have C:WirelessManager Prism2.device line in your U-s?
If you so, put a ";' in front of it and reboot. Open CLI and type:
C:Wirelessmanager prism2.device


C:Wirelessmanager prism2.device VERBOSE
We'll see if the card can associate with the router first.
Sir_Lucas is offline  
Page generated in 0.06273 seconds with 9 queries