View Single Post
Old 07 January 2016, 15:59   #14
Total Eclipse
Registered User
Total Eclipse's Avatar
 
Join Date: May 2005
Location: Atherstone / UK
Age: 43
Posts: 107
Quote:
Originally Posted by emuola View Post
Hmm, this might actually be a challenge... What does the MiST actually output? Standard vga as 640 x 480@60Hz or only @50Hz?(
By default, it will output a VGA progressive signal at whatever frequency the normal computer would (so an NTSC Amiga or Atari ST would do 60Hz, PAL would be 50Hz). My TV's won't accept a 50Hz VGA signal, however some of the cores can be told to disable the scan doubler, and instead output a typical RGB SCART signal. You need to buy or make the appropriate cable, but it works very well.

I connect my Mist via SCART and can use all the cores I mentioned in my previous post. There are some that I'd still be interested in trying, but at the moment can't because the scan doubler can't be disabled (The Amstrad core, for one).

Last edited by Total Eclipse; 07 January 2016 at 16:00. Reason: removed 480p reference
Total Eclipse is offline  
 
Page generated in 0.04875 seconds with 9 queries