Quote:
Originally Posted by Toni Wilen
tools/showconfig output:
- without running any Derringer utilities
- after running utility that adds RAM
- after running utility that adds RAM + MAPROM enabled
- above two tests repeated with different RAM size (if you have different size SIMMs)
EDIT: if no showconfig (only 1.3), sysinfo boards and memory lists are also fine.
|
Got my system up and running over the break with help from the GVP emulation in FS-UAE to create a new WB 2.1 flash card. Here's the requested information, note the ROM mapping does not affect the config (would appear to match the manual in loading to RAM).
No utilities:
Code:
PROCESSOR: CPU 68030/68882fpu/68030mmu
CUSTOM CHIPS: ECS PAL Agnus (id=$0020), ECS Denise (id=$00fc)
VERS: Kickstart version 37.350, Exec version 37.152, Disk version 38.36
RAM: Node type $a, Attributes $205 (FAST), at $200000-$5fffff (4.0 meg)
Node type $a, Attributes $303 (CHIP), at $400-$fffff (~1.0 meg)
BOARDS:
Board + ROM (HD?) (unidentified): Prod=2017/11($7e1/$b) (@$e90000 64K)
RAM (unidentified): Prod=2017/10($7e1/$a) (@$200000 4meg Mem)
Executing "d3 dram" (command output, showconfig):
Code:
D3: CSA Derringer 030 Configuration Software, Version 1.0
CPU/FPU = 68030/68882
DRAM Configuration:
** SizeSimmUp returned a bitmap of $FFFF **
** SizeSimmDn returned a bitmap of $FFFF **
Memory range 08000000-09FFFFFF: Passed Test.
32MB of 32-bit DRAM memory added to system
D3.
Code:
PROCESSOR: CPU 68030/68882fpu/68030mmu
CUSTOM CHIPS: ECS PAL Agnus (id=$0020), ECS Denise (id=$00fc)
VERS: Kickstart version 37.350, Exec version 37.152, Disk version 38.36
RAM: Node type $a, Attributes $5 (FAST), at $8000010-$9ffffff (~32.0 meg)
Node type $a, Attributes $205 (FAST), at $200000-$5fffff (4.0 meg)
Node type $a, Attributes $303 (CHIP), at $400-$fffff (~1.0 meg)
BOARDS:
Board + ROM (HD?) (unidentified): Prod=2017/11($7e1/$b) (@$e90000 64K)
RAM (unidentified): Prod=2017/10($7e1/$a) (@$200000 4meg Mem)
Executing "d3 drom" (command output):
Code:
D3: CSA Derringer 030 Configuration Software, Version 1.0
CPU/FPU = 68030/68882
DROM Configuration:
512k DROM now enabled.
D3.