View Single Post
Old 20 November 2015, 19:26   #30

Join Date: Nov 2015
Location: Reedsburg, USA
Posts: 30
Send a message via Yahoo to mechanic_2
Originally Posted by Arnie View Post
UAE is just under 'HD Controller:' in the HDF selection panel.

If yours says different the just choose the A600/A1200/A4000 entry.

No other settings need to be entered.


Alternative method:

Make a copy of Workbench 3.x by right clicking on the entry and choose 'create copy'

Right click on 'copy of Workbench 3.x' and choose 'EDIT'

Click on the 'Media' tab and choose 'ADD...' at the bottom left of the panel.

Click on the 'Floppy Disk Image File' button and choose 'Hard Disk Image File'

Click on the button with the 3 dots at the end of the file box and find the .HDF

Click O.K.

Press Play.

Use HDToolBox with scsi.device to prep the .HDF.
The HDToolBox does not regonize the scsi.device. I tried uaescsi.device and the Amiga blows up. I also tried a different copy and used the edit method. I get the same thing. I can't access the partitions to initialize them and then format them. They do show up as DH2 and DH3 uninitialized. Now what? Why won't HDToolBox work?
mechanic_2 is offline  
Page generated in 0.03940 seconds with 10 queries