View Single Post
Old 20 November 2015, 19:08   #29
Arnie
R.I.P Smudge 18-08-16

Arnie's Avatar
 
Join Date: Aug 2005
Location: Leicester/UK
Age: 59
Posts: 3,861
Quote:
Originally Posted by mechanic_2 View Post
Arnie,
I have found the .HDF file on the proper hard drive. What about the filesystem entry, device, surfaces, and sectors entries? Do I enable the RDB mode? Also where do I find UAE so that I can choose the A4000?
Thanks,
rich!
UAE is just under 'HD Controller:' in the HDF selection panel.

If yours says different the just choose the A600/A1200/A4000 entry.

No other settings need to be entered.

------------------------------------------------------------------

Alternative method:

Make a copy of Workbench 3.x by right clicking on the entry and choose 'create copy'

Right click on 'copy of Workbench 3.x' and choose 'EDIT'

Click on the 'Media' tab and choose 'ADD...' at the bottom left of the panel.

Click on the 'Floppy Disk Image File' button and choose 'Hard Disk Image File'

Click on the button with the 3 dots at the end of the file box and find the .HDF

Click O.K.

Press Play.

HDF should appear on workbench as DH2:Uninitialized (may have more partitions if copied from another drive)

Last edited by Arnie; 21 January 2016 at 12:56.
Arnie is offline  
 
Page generated in 0.06358 seconds with 9 queries