View Single Post
Old 13 November 2015, 18:47   #2
Toni Wilen
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 43
Posts: 20,665
This accelerator board does not need emulation, it has no boot ROM and most likely no autoconfig boards either. Emulating one or two io addresses to support included RAM speed program isn't good enough reason, at least not yet

RAM location may not be "standard" (if adding all RAM requires running some common) but most likely it uses usual 0x08000000 region if KS 3.1 was needed to autoconfigure it.

Configuring matching CPU and using "CPU slot RAM" should do it.

Only useful real world difference is CPU/RAM speed but it is not emulated (at least not yet).
Toni Wilen is offline  
Page generated in 0.09377 seconds with 9 queries