View Single Post
Old 15 September 2015, 18:06   #181
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 42
Posts: 19,560
http://www.winuae.net/files/b/winuae_3200b12.7z

Beta 12:

- Boolean config true value converts to 1 and false to zero before doing any calculations. someboolentry=[1-someboolentry] custom event string now works as expected.
- Bridgeboard in VGA graphics mode only updated part of display (and sometimes nothing was updated).
- ESP (53C94, FAS216 etc..) SCSI updates to support Multi Evolution (Needs FIFO used count and does odd things)
- Multi Evolution 500/2000 SCSI controller emulation added.
- XT bridgeboard timer gate 2 pin was not hooked up in DOSBox CPU mode. ("Timer2 control function failed")
- Removed RTC status bit hack, PIC_TickIndex() works now. ("The Real Time Clock has not been initialized")
- Delay bridgeboard emulated MDA/CGA VRAM write interrupts until next vblank to reduce number of interrupts. (Real hardware may or may not do same)
- Initialize bridgeboard add-on IDE controllers after Z2 boards (was after Z3 which prevents them to initialize if used KS ROM does not support Z3 boards and at least one Z3 board was enabled).
- Adjusted MDA/CGA emulation mode hsync/vsync reporting, some programs had really slow screen updates.

Multi Evolution 500/2000:
- Not autoconfig but has boot ROM at $f00000 region. (Autoconfig is only for RAM expansion)
- Boots also under KS 1.2. (Boot ROM does some ugly system patches)
- Long word wide fake DMA.
- Boot image that also shows SCSI detection diagnostics messages.
- At least v3.0 ROM version driver does odd things, it sends MESSAGE ACCEPTED command first, then it reads the message byte.
Toni Wilen is online now  
AdSense AdSense  
 
Page generated in 0.08848 seconds with 10 queries