View Single Post
Old 31 August 2015, 15:45   #6
Registered User

ptyerman's Avatar
Join Date: Jun 2012
Location: Worksop/UK
Age: 53
Posts: 1,064
It won't have changed, drives just normally install with a boot priority of 0 by default, if all drives are set at 0 then sometimes the Amiga just tries to boot from the drive IT thinks is primary. You override this by using the boot priority switch. Place the cable on the IN port, the OUT port is for further SCSI peripherals on the chain, although a lot of the time it doesn't really matter with SCSI which port you put the cable on.
ptyerman is offline  
Page generated in 0.05025 seconds with 9 queries