View Single Post
Old 10 August 2015, 23:21   #33
Mounty
Hardware Design Engineer

Mounty's Avatar
 
Join Date: Jan 2013
Location: www.KMTech.co.uk
Posts: 372
Quote:
Originally Posted by BarryB View Post
Be much easier if they had used a round 5 pin din for socket/plug, would have saved a lot of messing about. Just wondering if there is a 5 pin round socket that will fit the same pinout?
Even if you could find a round plug with properly aligned pins, the body of the plug would prevent the connectors from mating properly.

For those who can use a soldering iron, with a little imagination you could cut the connector off and install almost any right-angled connector you wanted.

Or you could attach something like this:


Last edited by Mounty; 10 August 2015 at 23:26.
Mounty is offline  
 
Page generated in 0.06051 seconds with 9 queries