View Single Post
Old 28 June 2015, 10:32   #10
B14ck W01f
m68k all the way
 
Join Date: Aug 2011
Location: Koalaland
Posts: 473
So I have been playing around with the DKB WildFire expansion on one of my A2000 configurations, but didn't get very far with it. While it boots, what appears is a series of blue- and red-moving stripes, then it stops at a blue screen.

Looking through the log files, I see a bunch of messages like these.

Quote:
50-339 [32 179=307]: Illegal instruction: 0808 at 0028000A -> 0028000A
51-554 [93 143=110]: warning: WRITE.W to address $ffe8fffa : value $2700 PC=0028000a
54-068 [217 152=243]: SERIAL: period=40, baud=115200, hsyncs=1, bits=8, PC=28000a
54-068 [217 219=295]: cia_wput: unknown CIA address FFBFFFFC=2700 0028000A
And if I turn on cycle-exact, I get a HALT7.

According to the manual, you can boot your A2000 hard drive as normal then run the installation program, then mount the expansion afterwards. The install program forces you to install the Ethernet tools as well, but installing them causes the similar "file not found" message. I got the disk from amiga.resource.cx. I am going to copy the tools manually, and see how that goes.

Log and config in ZIP file.
Attached Thumbnails
Click image for larger version

Name:	001.png
Views:	284
Size:	3.5 KB
ID:	44591  
Attached Files
File Type: zip config + log.zip (92.6 KB, 280 views)
B14ck W01f is offline  
 
Page generated in 0.05129 seconds with 10 queries